|
APPLICATION: The Booster 10'604 distributes a DMX512-Signal on 12 outputs. Outputs are opto-isolated from input.
The Booster exists in two different types. The models differ only in connectors type: - Booster 10'604 with 5 pins XLR connectors
- Booster 10'604 with 8 pins RJ-45 Ethercon connectors, using ESTA wiring standard.
| FEATURES: - Opto-isolated input
- 12 regenerated DMX outputs
- Signal-analysis through a processor
- Ethernet option using ArtNet protocol
- Dynamic patch option
- Ethernet-DMX merging option
| Inputs: - 1 Opto-isolated input
- The input impedance corresponds about to the eighth of normal DMX value, it allows the connection of more devices on a DMX line.
- Robust input protection: protection against electrostatic discharges according to EC 1000-4-2 standard.
| Outputs: - 12 opto isolated DMX512 outputs
- Slew-rate limited outputs driver:
Reduces the EMC-Radiation of the RS485 connection.
Increases the signal quality by connexion without terminating resistor.
|
TECHNICAL DATA:
Inputs: | 1x XLR or RJ45 - ESTA Pinout (Ethercon) | Outputs: | 12x XLR or RJ45 - ESTA Pinout (Ethercon) | Ethernet (Option:) | Standard 10baseT - RJ45 connector | Dimensions: | The unit is supplied in a 19'' rack mounting
19 inch (483mm)/1 U (44mm) | Unit dimensions: | W x H x D 446mm x 91mm x 40mm
(without rack mounting panel) | Weight: | 0.95 Kg | Mains supply: | 230V ~ / 50Hz |
|
